The Chevrolet Tahoe comes normal with remote keyless entry, as do many modern autos. In case your remote is misplaced or broken and also you wish to exchange it, you may must program its alternative earlier than it may be used. You can even program further remotes, past the two that include your Tahoe (the Tahoe’s memory will retailer as much as eight). The method is completely different between the third-generation (2007 to 2010) and the second-generation Tahoe (1999 to 2006).
Chevy Tahoe Program Remote Instructions
Third-Generation Tahoe (2007 to 2010)
1. Shift your Tahoe into park and transfer the key into the “On” place.
2. Maintain the journey odometer button (proper aspect of instrument cluster) for three seconds, till the message “Remote Key Learning Active” is displayed.
3. Press and maintain the “Lock” and “Unlock” buttons on the remote for fifteen to twenty seconds, till you hear a affirmation chime.
4. Turn the ignition to “Off” and remove the key to finalize the programming sequence.
Second-Technology Tahoe (1999 to 2006)
5. Ensure that all of the doors are closed, after which insert the key without turning it.
6. Press and hold the “Unlock” button on the door panel (maintain it whereas performing step three).
7. Turn the ignition to “On” (without cranking), after which again to “Off”. Then, turn it to “On” and again to “Off” once more.
8. Release the “Unlock” button on the door panel.
9. Press and hold the “Unlock” and “Lock” buttons in your remote till the door locks cycle (this can take roughly 30 seconds).
Read more : How to Program a Chevy Tahoe Remote
